Excellent Balance
Dynamic balancer reserves upper die weight to eliminate the inertia produced by reciprocation. Vibration can be reduced to the extreme low level.
Crank Supporting
2 bearings and 2 brass bushings are applied to get smaller clearance and resist wear through years.
Guiding System
Plunger isolates slide from angular front-to-back movement of connection. Dual guide post symmetrically absorbs sideward thrust during stamping. Casting guide hole in frame enhances the strength of guiding system. Static pressure design is applied at plunger & guide posts to keep verticality and non-wearout throughout years.
Reduce Deflection During Stamping
Gap enclosure design helps to decrease deformation and increase die service life.
Cast Iron Frame
1-set massive frame helps to resist deflection and reduce vibration.
Aluminum Alloy Air Clutch
Aluminum alloy air clutch has the advantage of high torque and low inertia. Work sensitively and smaller brake angle. With shedder device, tool jam is solved easily.
Slide Locking System
Hydraulic locking device of screw rod eliminates the clearance to keep reciprocating accuracy.
Lubrication system
Oil circulating by pump to prevent overheating and provide lubrication for all components.
Control System
User-friendly Control system
All information display on the control screen that make setting and checking easily. Tooling data saves on the system to prevent damages from wrong setting.
- 7 digit counter setting x 2
- Die height indicator (0.01mm)
- Crank angle indicator (clock/number)
- SPM indicator (numeral)
B.D.C. Test
Dynamic Accuracy Test
Not only JIS static accuracy checked but dynamic accuracy tests are also our standard procedures.
Start Running at Constant Speed
Press starts cotinuous running. The maximum gap is 0.1mm.
The B.D.C. keeps stable after 30 minutes during running continuously.
Running at Stable Temp. & Constant Speed
After press temp. keeps stable, press keeps running and record the B.D.C positions of 1,000 stamping. The maximum gap is ± 0.005mm