Stroke Adjustable

Straight Side High Speed Precision Press

Stroke Adjustable
Friendly Operation

8 different stroke lengths can be changed easily. The shut height and press speed will adjust synchronously through SIEMENS control system.

Stroke Adjustable Friendly Operation

Quick Lifting

The quick access device enables the slide up 70mm
within 60 seconds to help users quickly solve tooling problems.

watch video
Knuckle Type
Design of Knuckle Structure

Slide velocity decreases towards BDC to reduce the impact of stamping, noise and vibration.

Cast Metal
2-Set Frame of Cast Iron Ensure Verticality

The guiding holes are cast at bed and machined at the same time.

crank type
Clutch and Brake
Separated Clutch and Brake

The torch of separated clutch & brake is bigger, so braking time and angle get less.
Balanced load at two side can reduces wear of bearings. If mechanical parts fail at clutch or brake, press stops immediately.

Guiding System
2 Plungers and 4 Guide Post with Hydro-Static Bushings

Dual plungers bear up more upward eccentric load during stamping. Hydro-static bushings can stand with higher thrust, decrease friction area, and suppress heat expansion to prevent the wear of bearing throughout years.

crank type
B.D.C. Test
Dynamic Accuracy Test

Not only JIS static accuracy checked but dynamic accuracy tests are also our standard procedures.

B.D.C. Test
Start Running at Constant Speed

Press starts cotinuous running. The maximum gap is 0.1mm.
The B.D.C. keeps stable after 30 minutes during running continuously.

B.D.C. Test
Running at Stable Temp. & Constant Speed

After press temp. keeps stable, press keeps running and record the B.D.C positions of 1,000 stamping. The maximum gap is ± 0.005mm

Control System
Siemens Colorful Automatic Computer Control System

Die Information

Alarm Records

Job Order

Load Monitor

Main Page

Pressure Monitor (option)

Service Log

Temperature Monitor (option)

Trouble Shooting

Machine Specification
Apex-K80A Apex-K125A
Spec / Type Unit Apex-K80A
Capacity tons 80
Slide stroke mm 16 / 22 / 28 / 34 / 40 / 48 / 56 / 64
Press speed spm 200 - 800 (Accroding to stroke)
Shut height mm 340 - 360 (Accroding to stroke)
Area of bolster mm 1200 x 750
Area of slide mm 1200 x 500
Shut height adjustment mm 50
Main motor hp 40
Spec / Type Apex-K80A
Capacity 80 tons
Slide stroke 16 / 22 / 28 / 34 / 40 / 48 / 56 / 64 mm
Press speed 200 - 800 spm (Accroding to stroke)
Shut height 340 - 360 mm (Accroding to stroke)
Area of bolster 1200 x 750 mm
Area of slide 1200 x 500 mm
Shut height adjustment 50 mm
Main motor 40 hp
Spec / Type Unit Apex-K125A
Capacity tons 125
Slide stroke mm 16 / 22 / 28 / 34 / 40 / 48 / 56 / 64
Press speed spm 200 - 700 (Accroding to stroke)
Shut height mm 360 - 380 (Accroding to stroke)
Area of bolster mm 1400 x 850
Area of slide mm 1400 x 640
Shut height adjustment mm 50
Main motor hp 50
Spec / Type Apex-K125A
Capacity 125 tons
Slide stroke 16 / 22 / 28 / 34 / 40 / 48 / 56 / 64 mm
Press speed 200 - 700 spm (Accroding to stroke)
Shut height 360 - 380 mm (Accroding to stroke)
Area of bolster 1400 x 850 mm
Area of slide 1400 x 640 mm
Shut height adjustment 50 mm
Main motor 50 hp